It is everyone’s dream to build their own house. For this, people invest their life savings. It is very important to take care of small things while building a house, because a mistake made during construction can become a big problem in the future. Especially when it comes to roofing a house, along with cement, sand, gravel and water, weather also has to be taken into account.
People often have a question whether it is better to get roof molding done in winter or summer? Some masons say that summer is good, while some say that concrete grips better in cold. But does changing weather really make a difference to the strength of the roof? Can roofing in December and January weaken the house?
Actually, the strength of the roof does not depend only on the season in which the molding is done. In this, the correct ratio of cement and concrete, amount of water, proper mixing, proper filling and curing of concrete play a big role. Let us understand in simple language what things should be kept in mind while roofing in winter and summer.
Is it right to put roof in winter or not?
Mason Anil Sah told that it is not wrong to roof the house in winter. If there is normal cold in your area and the temperature is not going too low, then a good quality roof can be prepared even in this season. Actually, after mixing cement and water in concrete, a chemical process starts. This is called hydration. Through this process, concrete gradually hardens and gains strength.
This process slows down due to low temperature in winter. This means that the concrete may take more time to gain strength than in summer. Therefore, one should not rush after laying the roof in winter.
If the temperature drops too low at night, it is also important to protect the concrete from the cold in the initial days. In extreme cold or frost conditions the concrete surface can be damaged. In such a situation, arrangements for casting and its safety should be made with the advice of an engineer.
Keep these 4 things in mind while getting casting done
Do not get casting done in extreme cold
If the temperature in your area is very low and there is frost at night, then roofing should not be done without preparation. The speed at which concrete gains strength slows down in cold weather. Therefore, it is important to cover the concrete when necessary and maintain the proper temperature. Engineering standards prescribe special precautions for pouring concrete at temperatures below 5 degrees Celsius. In such a situation, casting in the normal way is not right.
Do not add more water than necessary to concrete
Some people think that concrete does not dry quickly in winter, so a little more water can be added to it. But this is a big mistake. Adding excessive water to concrete can affect its strength and durability. This can later lead to problems like cracks and water leakage. Therefore, keep the quantity of water as per the mix design decided by the engineer.
Do not be negligent in roofing
Mistry said that in winter many people think that it is cold, hence there is less need to pour water on the roof. but it’s not like that. To strengthen concrete, it is important to maintain moisture. Curing should be started at the right time after casting the roof. For this, water can be kept on the roof or it can be covered with a wet cloth continuously.
Do not remove shuttering in a hurry after molding
After laying the roof, some people soon start removing the battens and shuttering below. Doing this can be dangerous. It is important to give the concrete time to gain sufficient strength. When to remove shuttering and supports depends on the size of the roof, span, strength of concrete and engineer’s advice.
What are the advantages and disadvantages of roofing in summer?
Roof molding can be done even in summer. But the biggest problem in this season is strong sunlight and hot wind. Due to heat, the water present in the concrete starts flying rapidly. This can cause the concrete surface to dry quickly. If proper care is not taken on time, there is a risk of small cracks appearing on the surface.
Apart from this, cement reacts quickly in hot weather. This allows the concrete to set quickly, leaving less time for workers to spread it, place it properly, and compact it with a vibrator. However, this does not mean that roofing in the summer is wrong. If proper arrangements are made, a strong roof can be built even in this season.
Keep these things in mind while roofing in summer
Get cast in the morning or evening
The temperature can be quite high during the afternoon in summer. In such a situation, it is better to get the casting done early in the morning or in the evening. With this the effect of strong sunlight and hot wind can be reduced.
Protect cement, sand and aggregate from sunlight
The material used in casting should be avoided in exposure to strong sunlight for a long time. Hot materials can increase the temperature of the concrete. Therefore, wherever possible, keep sand and ballast in the shade.
Do curing after casting
In summer, water evaporates from concrete rapidly. In such a situation, the importance of Terai increases further. The roof surface should be protected from drying out and continuous curing should be done at the right time.
Do not add water to concrete
Many times concrete starts hardening quickly in the heat, so workers pour water on top to dilute it again. One should avoid doing this. To maintain the workability of concrete, proper mix design and, if necessary, approved admixtures should be used in consultation with the engineer.
For how many days should the roofing be done to strengthen the roof?
After laying the roof of the house, its curing i.e. curing is one of the most important tasks. During this time, the concrete gets sufficient moisture, due to which the chemical process of cement continues properly.
According to Indian standard IS 456, concrete made from Ordinary Portland Cement (OPC) should be kept moist for at least 7 days. Whereas in case of PPC and other blended cement, curing is required for at least 10 days. This period may have to be extended further in hot and dry weather. Therefore, do not close the valley by adding water for just two-three days. Follow the correct period according to the type of cement and season.
So what is the best season for roofing?
Roofing can be done in both seasons in normal and favorable temperatures. In winter, it is important to protect yourself from extreme cold and frost, while in summer, you have to pay attention to strong sunlight, hot wind and fast flowing water. If the temperature in your area does not drop too low in winter, you can get roof molding done during this season also. Whereas in summer, casting in the morning or evening and good curing can give better results.
The real secret of making a roof strong is not just the weather, but proper mixing, good quality concrete, proper vibration and timely lowering. Therefore, do not take a decision just by listening to the mason. Before casting the roof, definitely understand the process of mix design and construction from a qualified civil engineer.
—- End —-
Source link
[ad_3]